Rotary Joints Exporter

Rota-Tech paper applications span the production chain from the raw pulp and paper mills, to the downstream paper converters. Mills use steam joint and siphon systems and water unions for heating and cooling. Converters use rotating unions for heating and cooling rolls, as well as winders with air clutches and brakes. Massive equipment is used to manufacture paper rolls from raw pulp. Rota-Tech rotating unions are used in the headbox, press rolls and nip rolls, while the dryer section employs Rota-Tech steam joints and siphons for steam and condensate removal. Calendar rolls require unions for either steam or hot water. Large parent rolls of paper from the mill are placed on winders with air clutches and brakes so that paper rolls can be heated or cooled, coated, cut, slit or cured. Rota-Tech rotating unions are used for heating and cooling rolls.The pulp is fed to a paper machine where it is formed as a paper web and the water is removed from it by pressing and drying. Drying involves using air or heat to remove water from the paper sheets. Various forms of heated drying mechanisms are used. On the paper machine, the most common is the steam heated can dryer

Rota-Tech is quite reputed among the Textile Rotary Union Manufacturers and Exporters in India. Various national as well as international clients are placing bulk orders for the Metal Textile Rotary Union, as no alternative is available in terms of quality and performance.The use of optimum quality materials in the manufacturing of the Rotary Union in Textile Industries ensures high durability, waterproof, corrosion & abrasion resistance and auto resistance to climatic variations. Additionally, customers are eased with the availability of the Textile Seals that comply with the international quality standards.

The steel industry is one of the largest users of rotating unions primarily for continuous casting machines (CCM) which use Rota-Tech rotating unions to cool the numerous rolls that support molten slabs as it moves by gravity through various segments onto a run-out table to downstream annealing and heat treating. The slab is formed into coil or sheet. Coil is further converted in processing centres that require hydraulic unions for actuation of mandrels. Molten steel is poured from massive ladle turrets into a mould that pushes thru various segments over hundreds of water-cooled rolls, and eventually to a run-out table for further processing. The slab is converted into sheet or coil. Metal service centres perform such cold-processing as slitting or cutting coils, stamping sheet and more. Rota-Tech hydraulic unions are used for holding of the steel rolls, and actuation of mandrels.

The manufacturing of plastic materials encompasses a wide variety of applications including cast film, blown film, foam, flexible and rigid sheet extrusion, single and multi-layer co-extrusion, blow moulding, thermoforming, pelletizing, wire and cable, injection moulding and winding. Rota-Tech rotating unions for water and thermal oil service are used for heating or cooling the many processing rolls throughout the wide variety of applications. In addition, Rota-Tech rotating unions for air and hydraulic service are used in winding and injection moulding applications. Plastic produced as a continual web, film, or coating will be heated or cooled with rolls that utilize rotating unions.

Drilling rigs (oil or gas) use air clutches and brakes that require Rota-Tech rotating unions. Rota-Tech water unions are used to flush mud from the drill tip, and must withstand shock and vibration in this severe application. Oil and petrochemical refineries use batch mixers, flaking mills, blenders and drying rolls that each require Rota-Tech rotating unions.Rigs used for drilling oil, gas or water, including blast hole rigs, employ water unions to flush mud from the drill tip. Special two-passage unions are used for lifting the drill pipe with air, and cooling water for lowering the drill pipe into position.Oil and petrochemical refineries use batch mixers, flaking mills, blenders and drying rolls that each require Rota-Tech rotating unions.

Rota-Tech steam joint and siphon systems are critical components in corrugators, the large equipment used to manufacture corrugated fibre board, a paper-based material consisting of a fluted corrugated sheet and one or two flat linerboards, ultimately used for corrugated boxes and shipping containers. Single-piece units that mount directly onto the roll journal with carbon graphite bushings that support the steam joint housing relative to the rotor. Units that mount onto support rods that are secured to the frame of the machine. This rigid support allows the steam joint to withstand side loads applied by the steam and condensate hoses.

Filton Rotary Unions are used extensively within the Rubber Industry for both mixing and extrusion.
There are different types of machines which will use Filton Rotary Unions within the Rubber Industry, such as; Mills, Calendars and Extruders (which make profiles). Mixing is done by 2 roll mill, the two rolls rotate towards each other. The machine that is normally used is the Banbury Mixer. The rolls are heated and cooled to keep the product at a certain temperature; this is done by water passing through the Filton Rotary Union into the roll. Rubber Extrusion is similar to Plastic Extrusion; Filton Rotary Unions are used to cool the extruder screw. The Extruder pushes material through a barrel with a screw. The Extruder is a machine which applies shear force to a raw product (such as rubber) to make it into a final product.

Printing on flexible rolls of paper or plastic films requires Rota-Tech rotating unions for air or hydraulics, as well as chill rolls for temperature control. Web offset and sheet printing equipment use many unions on the ink vibrator and chill rolls. Web offset printing equipment use rolls or webs of paper. Rotating unions provide temperature control on the ink vibrator and chill rolls for such high-volume printing applications as newspapers, magazines, catalogues and books. Sheet-fed printing uses single sheets of paper or paperboard. Rotating unions provide temperature control on the ink vibrator and chill rolls for short-run printing applications as brochures, letterhead and related commercial printing.

Coolant flows axially through a rotating union into the spindle and toolholder directly to the heat surface. Nearly all modern machine tools and machining centres are equipped with so-called “flood coolant”. High-speed cutting tools require both cooling and lubrication to reduce the rate of tool wear and to prevent over heating which degrades the tool’s strength. For many machining operations, such as milling or hole drilling, flood-coolant systems are less effective at delivering coolant fluid to the cutting edge. Rota-Tech offers the greatest variety of seal technologies and mounting configurations to fit every machining application requirement.

Auto manufacturing is a diverse user of rotating unions for a broad range of parts or components and materials, whether machined steel, iron or aluminium, stampings, plastics, glass or paperboard. Rotating unions are used for operations that require coolant, lubricant or hydraulics.Complex metal components from engine blocks, to transmission housings require transfer lines for deep drilling facilitated by through-spindle coolant. Rota-tech offers Air and Hydraulic rotary unions engagement and disengagement of clutches brakes etc.