SINGLE CARTRIDGE MECHANICAL SEALS - Image 1

SINGLE CARTRIDGE MECHANICAL SEALS

Type RT-S61

  • Single seal, Inside mounted
  • Unbalanced
  • Dependent on direction of rotation
  • Easy Installation, Field repairable
  • Interchangeable mating rings & seal ring

Description

Single Cartridge Mechanical Seal are straight forward and easy installation due to preassembled unit which can be directly installed without any dimensional adjustment during installation. It can withstand back pressure i.e vacuum operation. Customer specific versions available. Cooling arrangement is done by Oil seal or Throttle ring made by Teflon bush or Graphite bush.

We also manufacture and supply  Double Cartridge Mechanical Seals, High Pressure & Speed Balance and Balanced Cartridge Mechanical Seals as being top most mechanical seal manufacturers in Mumbai as well as known as one of the most precise mechanical seal manufacturing companies in India.

FAQ

  • It seals a rotating shaft and prevents fluid leakage from pumps and process equipment.
  • The cartridge design comes pre-assembled, making installation easier.
  • Commonly used in pumps and industrial process applications.
  • Check shaft diameter, pressure, temperature and RPM.
  • Consider the process fluid and its chemical properties.
  • Seal chamber dimensions and the existing seal model are also important for correct selection.
  • Pre-assembled design simplifies installation and setting.
  • Helps reduce installation errors compared with component-type seals.
  • Provides consistent sealing performance when correctly selected and installed.
  • Clean and inspect the shaft and seal chamber.
  • Position the cartridge seal according to the manufacturer’s setting dimensions.
  • Tighten the required components evenly and ensure proper shaft alignment.
  • Check for leakage before putting the equipment into normal operation.
  • Yes, replacement cartridge seals can be selected according to the existing seal.
  • Share the brand, model number, shaft size, dimensions, photo or drawing.
  • The replacement can be matched according to fluid, pressure, temperature and RPM.

Shaft Dia. : 20mm to 100mm

Pressure : Up to 10 bar

Temperature : -30°C to 150°C

Speed: 3000 RPM

Seal Ring Faces  : Carbon, TC and SiC

Seat Faces           : Carbon, SiC and TC

Elastomer            : Viton, PTFE, and FFKM

MOC                  : SS 316, HAST-C Alloy – 20