Reverse Balance Seals
Reverse Balance Seals

REVERSE BALANCE MECHANICAL SEALS

RT-50B

  • Single Acting Mechanical Seal.
  • Dual Directional Mechanical Seal.
  • Outside Mounted Mechanical Seal.
  • Reverse Balanced Design.
  • Multi Spring design Mechanical Seal.

Description

The Type RT-50B is Reverse Balance Mechanical Seals. It is multiple springs externally mounted reverse balanced seal with O-ring as secondary sealing member. This seal can also be used for corrosive services as the metallic components do not come in contact with liquid to be sealed. This seal can also install indouble back to back arrangement as an internal seal. Sealing member can also be changed as per chemical compatibility. All metal components including spring are isolated from aggressive media Sealing. Even if barrier fluid pressure goes down this seal will not allow process fluid to mix with barrier fluid.

We also manufacture and supply Single Spring Mechanical Seals, Multi Spring Mechanical Seals, Teflon Bellow Seals, Elastomer Bellow Mechanical Seals, and Metal Bellow Seals as being top most mechanical seal manufacturers in Mumbai as well as known as one of the most precise mechanical seal manufacturing companies in India.

FAQ

  • It is designed to seal rotating shafts in pumps and industrial process equipment.
  • The reverse-balanced design is suitable for applications where reliable sealing is required under pressure and demanding operating conditions.
  • It can be used with various industrial fluids depending on the seal materials.
  • When the application requires a balanced sealing arrangement for improved performance.
  • It can be suitable for higher-pressure or challenging fluid applications.
  • Selection depends on pressure, temperature, RPM and process media.
  • Check shaft diameter, operating pressure, temperature and RPM.
  • Specify the process fluid and its chemical properties.
  • Existing seal dimensions, equipment model and seal chamber details help ensure proper selection.
  • Clean and inspect the shaft and seal chamber before installation.
  • Install the seal according to the specified setting dimensions.
  • Ensure correct shaft alignment and keep the sealing faces clean.
  • Check for leakage before starting normal operation.
  • Yes, replacement seals can be supplied according to your existing seal or equipment.
  • Share the brand, model number, shaft size, dimensions, photo or drawing.
  • The replacement can be matched according to fluid, pressure, temperature and RPM.

Shaft Dia. : 16mm to 70mm

Pressure : Up to 8 bar

Temperature :-20 °C to 200 °C (Depending upon Elastomer)

Speed: 3000 RPM

Seal Ring Faces : Carbon and SiC

Seat Faces :Carbon, Ceramic and SiC

Elastomer : Viton, EPDM, TTV, FEP and FFKM

MOC : SS 316, Hast-C and Alloy-20