kirloskar pump mechanical seals
kirloskar pump mechanical seals

KIRLOSKAR PUMP MECHANICAL SEALS

Kirloskar Pump Seals

  • Kirloskar Pump KPD, Mechanical Seal
  • Kirloskar Pump CPHM, DBL Mechanical Seal.
  • Kirloskar Pump SHM, SHL Mechanical Seal.
  • Kirloskar Pump i-CP, ROMAK, i-CPM, AT, GK(P).
  • Kirloskar Pump DB, CE, MF, Mechanical Seal

Description

The Type RT-M14/RT-M15 is Metal Bellow Mechanical Seals with extremely durable in applications where temperature and media (fluid) result in an aggressive environment. Rotating bellows design acts to clear convolutions and prevent accumulation of debris. These bellow seals are constructed by welding a series of diaphragms together at the edges to form a bellows unit of Alloy C-276 providing high strength and excellent corrosion resistance. Recommended for high temperature mediums e.g. hot oils, pitch, tar and other hydrocarbons, fuels. Pumping ring incorporates better circulation of barrier fluid and coolers.

We also manufacture and supply Single Spring Mechanical Seals, Multi Spring Mechanical Seals, Teflon Bellow Seals, Elastomer Bellow Mechanical Seals, and Reverse Balance Mechanical Seals as being top most mechanical seal manufacturers in Mumbai as well as known as one of the most precise mechanical seal manufacturing companies in India.

FAQ

  • Check the pump model, shaft diameter and existing seal dimensions.
  • The old seal code or part number can make identification easier.
  • Pump nameplate details can also help confirm the correct seal.
  • Yes, replacement mechanical seals are available for various Kirloskar pump applications.
  • The seal can be matched according to the pump model and existing seal specification.
  • Share the old seal details to check compatibility before ordering.
  • Yes, seal materials can be selected according to the pumped liquid and operating conditions.
  • Options may include different seal faces and elastomers for water, oil, chemicals or abrasive fluids.
  • Correct material selection helps improve sealing performance and service life.
  • Inspect the shaft, seal chamber and mating surfaces for wear or damage.
  • Confirm the new seal’s dimensions and setting requirements.
  • Check that the seal material is suitable for the pumped fluid, temperature and pressure.
  • Yes, the old seal can be used for identification.
  • Provide its dimensions, markings, part number or clear photographs.
  • This information helps match a suitable replacement without relying only on the pump name.

Shaft Dia. : 25mm to 100mm

Pressure : Up to 25 bar

Temperature : -30°C to 260°C

Speed: 3000 RPM

Seal Ring Faces : Carbon, SiC and TC.

Seat Faces :Carbon, TC and SiC.

Elastomer : Viton, PTFE, FEP, EPDM and FFKM

End fitting MOC : SS 316, Hast- C and Carpenter 42

Bellow MOC : HAST – C, AM350 and Inconel