double balance unbalance liquid lubricated agitator reactor seal
double balance unbalance liquid lubricated agitator reactor seal

GLASS LINED REACTOR MECHANICAL SEALS

Type RT-85/85B

  • Seat rotating.
  • Stationary springs.
  • Double seal Balanced.
  • Standard version with grooves optional.
  • Unidirectional and bi-directional grooves.
  • Gas-lubricated.
  • Does not open in the event of buffer pressure failure.

Description

Glass Lined Reactor Mechanical Seals are designed for Top Entry Drives in Glass Lined Vessel. Compact Economical Cartridge Mechanical Seal for Glass Lined Vessel. These Seal specially designed for any mixed and pressurized liquid in Vessel with Top Entry Agitators where no leakage of Highly Acidic Process Gas OR Fluids to the Environment can be tolerated. Complete Pre-assembled Tested Unit ready for installation. These seals Design for using either without bearing (RT-85) or with integral bearing (RT-85B).

We also manufacture and supply Single Agitator Seals, Double Agitator Seals, Single Dry Agitator as being top most mechanical seal manufacturers in Mumbai as well as known as one of the most precise mechanical seal manufacturing companies in India.

FAQ

  • It seals the rotating agitator shaft and helps prevent process-media leakage.
  • It is designed for use with glass lined reactor equipment.
  • Proper sealing is important where chemicals, solvents or corrosive media are processed.
  • Check shaft diameter, operating pressure, temperature and agitator RPM.
  • The process chemical and its compatibility with seal materials are also important.
  • Reactor make, seal chamber dimensions and existing seal details help in correct selection.
  • Material selection depends mainly on the process chemical, temperature and operating conditions.
  • Seal faces and elastomers should be compatible with the process media.
  • Providing the chemical name and operating conditions helps determine suitable materials.
  • Inspect and clean the shaft and seal housing before installation.
  • Install the seal according to the specified shaft and setting dimensions.
  • Avoid excessive force or misalignment that could affect the reactor or sealing components.
  • Check for leakage after installation before normal operation.
  • Yes, replacement seals can be supplied based on the existing seal or reactor specifications.
  • Share the reactor make, shaft size, old seal dimensions, model number, photo or drawing.
  • The replacement can be matched according to the process media, pressure, temperature and RPM.

Shaft Dia. : 25mm to 150mm

Pressure : Full Vacuum to 30 bar

Temperature : -30°C to 260°C

Speed : 400 RPM

Seal Ring Faces   : Carbon and SiC

Seat Faces            : SiC and TC

Elastomer            : Viton, TTV, FEP and FFKM

MOC                     : SS 316 – CHANGE OF MOC ON REQUEST